Selection of appropriate PVC water stopper Ribbed Type – It has a multi-purpose water stopper design to be used for the expected differential settlement of poured concrete and a firm concrete grip desired.   Dumbbell Type – With greater variation in temperature, expansion and contraction of joints happen. Dumbbell type water stoppers are the suggested ones for these cases.   Kicker (Surface Type) – Where the embedded types cannot be used owing to interference of steel reinforcement, these are placed externally. Installation procedure: During installation, using small wires, the water stoppers are tied to the steel framework through the eyelets. Also, certain metal clamps are used to grip the water stop seal and keep it in proper position. Initially, half of the water stopper is places in the concrete. It leaves the other half extended. Then, the other half is embedded that leaves the centre bulb free for expansion and contraction movements. Applications Of PVC Water Stoppers Public Utilities: For bridges, road embankments, tunnels, water tanks, water filtration systems, swimming pools, sewage plants, clarifiers, dams, canals, reservoirs, aqueducts and irrigation projects cooling towers.   Buildings: For basements, foundations slabs, masonry joints, retaining walls, terraces, overhead & underground water tanks and   Industries: For fertilizer steel, chemical plants, waste treatment plants, atomic reactors, thermal & hydro power stations and shipyard & docks. Precautions to take while water stopper installation They are vulnerable to damage during the construction process   The concrete compaction around the water stopper should be taken care of. If not, it can dislocate and lead to a risk of honeycomb formation. This might result in leakage through concrete instead of the joint. Methods for joining PVC water stoppers with heater blade Water stoppers can be joined on the site using a simple electrical heater blade.   Water bars having the same width and design should be sharply levelled with a knife at the   Turn on the Electric Heater Blade. Wait till it becomes hot   Place the water stopper on both sides of heater blade. Press it until it melts but without burning   Remove the heater blade upward   Join the molten ends quickly. Hold them together firmly for approximately 20 to 30 seconds. PVC Water Stopper with Center Bulb 150 (6") x4mm   150 (6") x5mm   150 (6") x6mm.   150 (6" ) x8mm   150 {6") x10mm   200 (8" x 8mm   200 )8") x10mm   240 x 8mm   240x10mm.   250 (10") x8mm   250 (10") x10mm   250(10" x12mm   300 (12") x6mm   300 (12") 8mm   300 (12") 10mm   300 (12" ) 12mm   300(12") 15mm A PVC water stopper, also known as a PVC waterstop, is a type of construction material used to prevent water penetration in concrete structures, such as basements, swimming pools, water tanks, tunnels, and other areas where water containment is essential. It is designed to create a watertight seal and protect the integrity of the structure. Here are some key details and features related to PVC water stoppers: 1. Material: PVC water stoppers are made from high-quality polyvinyl chloride (PVC) material, which is known for its excellent durability, flexibility, and chemical resistance. PVC is resistant to water, chemicals, and environmental factors, making it suitable for use in various water containment applications. 2. Types: PVC water stoppers come in different types and profiles, depending on the specific application and requirements. Common types include straight PVC water stoppers, bulb-shaped water stoppers, ribbed water stoppers, and external water stoppers, among others. Each type has its unique design and features to cater to different sealing needs. 3. Design and Structure: PVC water stoppers are typically designed with a combination of rigid and flexible sections. The rigid sections provide stability and anchoring within the concrete structure, while the flexible sections allow for movement and accommodate joint e

A PVC water stopper, also known as a PVC water stop or simply a water stopper, is a specialized construction material used in civil engineering and building construction. It is designed to prevent the passage of water through joints or openings in concrete structures, such as expansion joints, construction joints, or penetrations, to ensure water-tightness and protect against water infiltration. PVC water stoppers are often used in applications where concrete structures are exposed to water, such as in dams, reservoirs, tunnels, swimming pools, basements, and underground construction. Here are some key features and uses of PVC water stoppers:

**Key Features:**

1. **Material:** PVC water stoppers are made from high-quality polyvinyl chloride (PVC) material. PVC is chosen for its durability, flexibility, resistance to chemicals and corrosion, and long service life.

2. **Design:** These water stoppers are typically designed as strips or profiles with varying shapes, such as "T," "I," or "X" shapes, to accommodate different types of joints and structural configurations.

3. **Flexibility:** PVC water stoppers are highly flexible and can adapt to the movement and expansion and contraction of concrete structures without compromising their effectiveness.

4. **Resistance:** They are resistant to water pressure, chemicals, and the corrosive effects of aggressive soils, making them suitable for a wide range of construction applications.

5. **Installation:** PVC water stoppers are installed within or along the joints of concrete structures, creating a physical barrier to prevent water infiltration. They are often embedded or cast into the concrete during construction.

**Uses:**

1. **Concrete Structures:** PVC water stoppers are commonly used in various concrete structures to maintain water-tightness, including dams, reservoirs, canals, bridges, tunnels, and underground parking structures.

2. **Swimming Pools:** In the construction of swimming pools and water tanks, PVC water stoppers are used to create water-tight seals around joints and connections.

3. **Basements:** When constructing basements or underground structures, water stoppers help prevent groundwater from seeping into the structure, ensuring a dry and moisture-free environment.

4. **Expansion Joints:** They are used in expansion joints to accommodate the movement and expansion of concrete structures while maintaining water-tightness.

5. **Retaining Walls:** PVC water stoppers are employed in retaining walls to prevent water from infiltrating behind the wall, which can cause erosion and damage.

6. **Underground Utilities:** These water stoppers can be used in underground utility tunnels or conduits to prevent water ingress and protect the integrity of utility lines.

7. **Tunnels and Culverts:** In tunnels and culverts, PVC water stoppers are crucial for sealing joints and preventing water from entering the structure.

Proper installation of PVC water stoppers is essential for their effectiveness. They should be selected based on the specific project requirements and construction conditions, including joint type, expected movement, and water pressure. Additionally, following industry standards and guidelines for installation and quality control is critical to ensure the long-term performance and water-tightness of the concrete structure.

Sandhya Enterprises are one of the leading manufacturers of PVC water stoppers. These water stoppers are flexible plastic stripes that act as a physical barrier to water. These barriers are commonly employed at concrete joints in basements, water-retaining structures such as structural foundations, water tanks and swimming pools, and other below-ground constructions.

A typical water stopper consists of two identical halves on either side of a central bulb. Increased path length made possible by this design effectively diverts any water that could try to enter past the water stopper\\\'s edge. Water stoppers increase their efficiency in preventing water penetration and preserving the integrity of the structures they are applied to by offering this extra extension. Sandhya Enterprises is dedicated to producing water stoppers of the highest calibre that adhere to industry requirements and provide dependable water barrier solutions.

Compounding of PVC Water Stopper

Our water stoppers are specially manufactured using an anti-ageing customized plastic compound. Additionally, it has PVC as a base polymer. These water stoppers offer several advantageous properties, such as high elasticity and tensile strength, immunity to corrosion, ensuring long-lasting durability even in harsh environments, and excellent weather resistance. They can withstand exposure to various chemicals, including acids, alkalis, metals, salts, and other corrosive substances. Other properties include lower water absorption, reducing the risk of water permeation through the joint. With their high hydrostatic pressure withstanding capacity, the water stoppers effectively resist water pressure, maintaining a watertight seal.

Moreover, the water stoppers are suitable for applications with dynamic loads or vibrations because they can endure strong turbine shocks. In times of earthquakes and flooding, they also show resilience, adding to the security. Sandhya Enterprises assures its water stoppers contain various qualities to suit the many demands of water barrier applications. It combines the anti-ageing customized plastic compound with PVC as the basic polymer.

Air Duct Hose is used for under hood application and low pressure and low suction application for air cleaner to engine connection, defroster ducting, air ducting. It is flexible, heat resistance and helical steel wire reinforced. Easily it is formed for desire shape and materials like Neoprene with Tear, Abrasion & Ozone resistance are used temperature rating is from -40ºC to 110ºC. 

iturn0image0turn0image1turn0image2Sandhyaflex PVC Chamfers are specialized construction accessories designed to create beveled edges in concrete structures, enhancing both the safety and aesthetics of the finished product. Manufactured by Sandhya Enterprises, based in Hyderabad, Telangana, these chamfers are made from high-quality PVC material, ensuring durability and resistance to weathering and chemicals.

Key Features:

• 
  

  Dimensions: Available in sizes such as 20x20mm and 25x25mm, with lengths typically ranging from 1.8 to 2.5 meters, accommodating various construction needs. citeturn0search0

  
  


• 
  

  Material: Constructed from industrial-grade PVC, these chamfers are lightweight yet robust, making them easy to handle and install. citeturn0search3

  
  


• 
  

  Applications: Ideal for use in concrete formwork to produce chamfered edges on columns, beams, walls, and other structural elements, thereby reducing sharp edges and improving safety and appearance. citeturn0search3

  
  

Benefits:

• 
  

  Reusable: The durable PVC material allows for multiple uses, offering cost-effectiveness over time.

  
  


• 
  

  Ease of Installation: The chamfers can be easily cut, shaped, and secured to formwork using nails, adhesive, or other fasteners, ensuring a snug fit during concrete pouring.

  
  


• 
  

  Enhanced Finish: By creating uniform beveled edges, these chamfers contribute to a professional and polished look in concrete structures.

  
  

For a visual demonstration of the advantages and features of Sandhyaflex PVC Chamfers, you can watch the following video:

videoAdvantages of PVC Chamfer Sandhyaflexturn0search4

PVC (polyvinyl chloride) foot steps can be utilized in various applications due to their durability, resistance to corrosion, and versatility. Here are some common uses and applications of PVC foot steps:   1. **Industrial Settings:**    - **Factories and Warehouses:** PVC foot steps are often used in industrial settings to provide elevated access to shelves, storage areas, or machinery.   2. **Commercial Spaces:**    - **Retail Stores:** In retail environments, PVC foot steps can be employed to help employees reach items on high shelves, making restocking and organizing merchandise more efficient.   3. **Healthcare Facilities:**    - **Hospitals and Clinics:** PVC foot steps are useful in healthcare settings, providing healthcare professionals with safe access to medical supplies stored on higher shelves or cabinets.   4. **Educational Institutions:**    - **Schools and Libraries:** In educational facilities, PVC foot steps can be used in libraries or classrooms to access books or materials stored on high shelves.   5. **Home Improvement:**    - **Home Use:** PVC foot steps are commonly used in households for various tasks such as reaching high cabinets, changing light bulbs, or accessing items on tall shelves.   6. **Laboratories:**    - **Research Facilities:** In laboratories, where cleanliness and resistance to chemical corrosion are crucial, PVC foot steps can be used to access equipment or supplies stored at elevated positions.   7. **Commercial Kitchens:**    - **Restaurants and Cafeterias:** PVC foot steps can be beneficial in commercial kitchens to help kitchen staff reach items stored on high shelves or access equipment efficiently.   8. **Outdoor Applications:**    - **Gardening:** PVC foot steps can be used in outdoor gardening activities to reach higher branches for pruning or harvesting fruits.   9. **Maintenance and Repairs:**    - **Maintenance Work:** Whether at home or in industrial settings, PVC foot steps are handy for maintenance tasks, providing a stable platform for repairs, inspections, or installations.   10. **Pool and Spa Areas:**     - **Swimming Pools and Spas:** In recreational areas, PVC foot steps can be used to access hot tubs, swimming pool equipment, or maintenance areas.   11. **RVs and Boats:**     - **Recreational Vehicles and Boats:** In confined spaces like RVs or boats, PVC foot steps can be used to access storage compartments or high shelves.   12. **Car Maintenance:**     - **Auto Repair Shops:** In automotive repair facilities, PVC foot steps can assist mechanics in reaching elevated areas of vehicles for inspections or repairs.   When using PVC foot steps, it\\\'s important to consider weight capacity, stability, and adherence to safety guidelines to prevent accidents and ensure the longevity of the steps. Additionally, the chemical resistance of PVC makes it suitable for environments where exposure to chemicals or moisture is a concern.PVC rungs are specialized components used in various applications where safe and durable access is required. Here are some common uses:   1. **Industrial Platforms and Walkways**: PVC rungs are frequently used in industrial settings to provide safe access to elevated platforms, walkways, and machinery. They are attached to support structures such as ladders, staircases, and access ramps, offering secure footing for workers and maintenance personnel.   2. **Marine and Offshore Structures**: PVC rungs are utilized in marine and offshore environments on vessels, oil rigs, and offshore platforms. They provide safe access to different levels of the structure, including decks, gangways, and equipment compartments, even in harsh marine conditions.   3. **Building Maintenance**: PVC rungs are installed on building exteriors to facilitate maintenance tasks such as window cleaning, façade inspection, and painting. They are commonly attached to building exteriors using anchor bolts or welded brackets, providing safe and secure access for maintenance personnel.  

A PVC suction hose pipe is a type of flexible hose made from polyvinyl chloride (PVC) material, and it is designed for suction (vacuum) applications. PVC suction hoses are commonly used in various industries for transferring liquids, solids, and gases. Here are some key features and uses of PVC suction hose pipes:

**Features:**

1. **Material:** PVC suction hoses are made from PVC, a versatile and durable material that is resistant to abrasion, weathering, and certain chemicals.

2. **Flexibility:** These hoses are designed to be flexible, allowing for easy handling and installation. The flexibility makes them suitable for applications where maneuverability is important.

3. **Reinforcement:** Many PVC suction hoses have a reinforcement layer, often made of rigid PVC helix or a combination of materials, to provide strength and prevent collapsing under suction pressure.

4. **Smooth Bore:** The interior of the hose typically has a smooth bore to minimize flow resistance and allow for the efficient transfer of liquids, solids, or gases.

5. **Temperature Resistance:** PVC suction hoses are generally suitable for a range of temperatures, making them versatile for different applications.

6. **Corrosion Resistance:** PVC is inherently resistant to corrosion, making these hoses suitable for various substances without the risk of deterioration.

7. **UV Resistance:** Some PVC suction hoses are UV-resistant, ensuring that prolonged exposure to sunlight does not degrade the material.

8. **Various Sizes:** PVC suction hoses come in a range of sizes to accommodate different flow rates and application requirements.

**Common Uses:**

1. **Agricultural Applications:** PVC suction hoses are often used in agriculture for irrigation, water transfer, and the suction and discharge of fertilizers and chemicals.

2. **Construction and Mining:** These hoses are employed in construction and mining industries for dewatering, suction of solids, and transfer of water and slurries.

3. **Industrial Applications:** PVC suction hoses are used in various industrial processes for transferring liquids, powders, and granules.

4. **Water Pumping:** These hoses are commonly connected to water pumps for suction purposes, helping to move water from one location to another.

5. **Oil and Chemical Transfer:** Depending on the specific formulation, some PVC suction hoses are suitable for transferring certain oils and chemicals.

When selecting a PVC suction hose pipe, it's essential to consider the specific requirements of your application, including the type of material being transferred, the required size, the level of flexibility needed, and any environmental conditions that may affect the hose's performance. Always refer to the manufacturer's specifications and guidelines for proper use and maintenance.

The Sandhyaflex Carbon Free Rubber Hose is designed specifically for use in environments where there is a need to prevent the transfer of static electricity or any carbon particles, typically in high-performance and sensitive industrial applications.

Key Features:

1. 
   

   Carbon-Free Construction:

   
   
   
   
   • This hose is designed without any carbon content in its construction, which makes it ideal for clean environments where carbon or particulate contamination needs to be avoided. This is especially important in industries like pharmaceuticals, food processing, and cleanrooms.
   
   
   
   


2. 
   

   Material and Durability:

   
   
   
   
   • Made of high-quality rubber, this hose is resistant to wear, abrasion, and environmental factors, ensuring long-lasting performance in harsh conditions.
   
   
   • The rubber construction ensures flexibility, durability, and resilience to various physical stresses while maintaining a lightweight profile.
   
   
   
   


3. 
   

   Prevention of Static Build-up:

   
   
   
   
   • Because it’s carbon-free, this hose is designed to avoid the build-up of static electricity, making it suitable for applications in environments where static charge could cause problems or lead to equipment malfunction or safety hazards.
   
   
   
   


4. 
   

   Chemical and Temperature Resistance:

   
   
   
   
   • The hose is resistant to a wide range of chemicals, oils, fuels, and temperature extremes, which makes it versatile for industrial, mechanical, and agricultural uses. It can withstand both high and low temperatures.
   
   
   
   


5. 
   

   Applications:

   
   
   
   
   • Typically used in industries where static electricity or contamination needs to be controlled, such as in:
     
     
     
     • Food and beverage manufacturing
     
     
     • Pharmaceutical production
     
     
     • Oil and gas
     
     
     • Chemical transfer
     
     
     • Mining
     
     
     • Agricultural applications
     
     
     
     
   
   
   
   


6. 
   

   Enhanced Safety and Performance:

   
   
   
   
   • The hose is engineered to meet the specific demands of industries that require safety in terms of both electrical conductivity and the cleanliness of materials being transferred.
   
   
   
   

Advantages:

• Ideal for preventing static-related hazards in environments sensitive to electrical charge.


• Carbon-free design ensures minimal contamination of transferred materials.


• Durability and flexibility offer high performance in tough industrial applications.


• Resistant to chemicals, abrasions, and environmental conditions.

Would you like more detailed information about its specific use cases or comparisons to other types of hoses?

Sandhyaflex PVC Water Stopper

Sandhyaflex PVC Water Stopper is a flexible waterproof sealing product used in concrete construction joints to prevent water leakage in structures such as basements, water tanks, tunnels, dams, swimming pools, reservoirs, retaining walls, and bridges. (

Ribbed Type

Provides strong grip with concrete and better sealing.

Installation Method

1. Fix the water stopper at the center of the concrete joint.

2. Tie it properly with reinforcement steel using wires/clamps.

3. Pour concrete carefully to avoid displacement.

4. Join water stopper ends using a heated blade welding method.

# Sandhyaflex PVC Water Stopper


## Main Features

* High flexibility and durability
* Chemical and corrosion resistance
* Excellent waterproof sealing
* Handles expansion and contraction of concrete joints
* Suitable for high hydrostatic pressure areas
* Available in Center Bulb, Ribbed, Dumbbell, and Kicker types ([][1])

## Available Sizes

Common Sandhyaflex PVC Water Stopper sizes include:

* 150 × 5 mm
* 150 × 8 mm
* 200 × 8 mm
* 200 × 10 mm
* 230 × 10 mm
* 240 × 10 mm
* 300 × 12 mm
* 300 × 15 mm ([][2])

## Applications

Used in:

* Water tanks
* Sewage treatment plants
* Dams and canals
* Foundations and basements
* Bridges and retaining walls
* Tunnels and underground structures ([][1])

## Technical Specifications

| Property | Specification |
| ---------------------- | ------------------------ |
| Material | PVC (Polyvinyl Chloride) |
| Hardness | 60–75 Shore A |
| Tensile Strength | Above 12 MPa |
| Elongation | 250%–300% |
| Temperature Resistance | -10°C to +70°C |
| Standard | IS 15058 / ASTM D412 |

([][1])

## Types of PVC Water Stopper

### Center Bulb Type

Used where expansion and contraction movement is expected.

![Image]( Ribbed Type

Provides strong grip with concrete and better sealing.

![Image]( Dumbbell Type

Suitable for large expansion and contraction joints.

![Image]( Installation Method

1. Fix the water stopper at the center of the concrete joint.
2. Tie it properly with reinforcement steel using wires/clamps.
3. Pour concrete carefully to avoid displacement.
4. Join water stopper ends using a heated blade welding method. ([Sandhya Enterprises][3])

### Product Video

[Sandhyaflex PVC Water Stopper Demo]( more details, specifications, and product range:

* [Sandhyaflex PVC Water Stopper Products]( [Sandhyaflex Official Product Catalog]( "PVC Water Stopper at Attractive Price - Durable and Compliant"
[2]: "PVC Water Stopper 240x10mm - Durable and Affordable Price"
[3]: "PVC Water Stopper Manufacturer, Exporter & Supplier from Hyderabad India"

manufactures several types of drainage spouts such as:

• Bridge Drainage Spout

• PVC Drainage Spout

• GI Coated Drainage Spout

• Underground Drainage Spout

• Rain Water Collection Drainage Spout

Typical category:

• Drainage & Water Management Products

• Bridge Drainage Accessories

• PVC / MS / GI Drainage Spouts

• Construction & Infrastructure Components

Price range:

• PVC drainage spout: around ₹90 per piece

• MS drainage spout: around ₹1,000–₹1,500 per piece

• Bridge drainage spout: around ₹2,250 per piece (

Sandhyaflex PVC Water Stopper

Sandhyaflex PVC Water Stopper is a flexible waterproof sealing product used in concrete construction joints to prevent water leakage in structures such as basements, water tanks, tunnels, dams, swimming pools, reservoirs, retaining walls, and bridges. (

Ribbed Type

Provides strong grip with concrete and better sealing.

Installation Method

1. Fix the water stopper at the center of the concrete joint.

2. Tie it properly with reinforcement steel using wires/clamps.

3. Pour concrete carefully to avoid displacement.

4. Join water stopper ends using a heated blade welding method.

Sandhyaflex PVC Water Stopper


## Main Features

* High flexibility and durability
* Chemical and corrosion resistance
* Excellent waterproof sealing
* Handles expansion and contraction of concrete joints
* Suitable for high hydrostatic pressure areas
* Available in Center Bulb, Ribbed, Dumbbell, and Kicker types ([][1])

## Available Sizes

Common Sandhyaflex PVC Water Stopper sizes include:

* 150 × 5 mm
* 150 × 8 mm
* 200 × 8 mm
* 200 × 10 mm
* 230 × 10 mm
* 240 × 10 mm
* 300 × 12 mm
* 300 × 15 mm ([][2])

## Applications

Used in:

* Water tanks
* Sewage treatment plants
* Dams and canals
* Foundations and basements
* Bridges and retaining walls
* Tunnels and underground structures ([][1])

## Technical Specifications

| Property | Specification |
| ---------------------- | ------------------------ |
| Material | PVC (Polyvinyl Chloride) |
| Hardness | 60–75 Shore A |
| Tensile Strength | Above 12 MPa |
| Elongation | 250%–300% |
| Temperature Resistance | -10°C to +70°C |
| Standard | IS 15058 / ASTM D412 |

([][1])

## Types of PVC Water Stopper

### Center Bulb Type

Used where expansion and contraction movement is expected.

![Image]( Ribbed Type

Provides strong grip with concrete and better sealing.

![Image]( Dumbbell Type

Suitable for large expansion and contraction joints.

![Image]( Installation Method

1. Fix the water stopper at the center of the concrete joint.
2. Tie it properly with reinforcement steel using wires/clamps.
3. Pour concrete carefully to avoid displacement.
4. Join water stopper ends using a heated blade welding method. ([Sandhya Enterprises][3])

### Product Video

[Sandhyaflex PVC Water Stopper Demo]( more details, specifications, and product range:

* [Sandhyaflex PVC Water Stopper Products]( [Sandhyaflex Official Product Catalog]( "PVC Water Stopper at Attractive Price - Durable and Compliant"
[2]: "PVC Water Stopper 240x10mm - Durable and Affordable Price"
[3]: "PVC Water Stopper Manufacturer, Exporter & Supplier from Hyderabad India"

The dimensions of PVC foot steps can vary depending on the specific product and its intended use. PVC foot steps come in different sizes and shapes to accommodate various applications. If you have a particular product in mind, it\\\'s best to refer to the manufacturer\\\'s specifications for accurate dimensions.   However, I can provide a general idea of typical dimensions for certain types of PVC foot steps:   1. **Small Foot Stools:**    - Width: 200 mm to 300 mm    - Length: 300 mm to 400 mm    - Height: 150 mm to 200 mm   2. **Medium-sized Foot Stools:**    - Width: 300 mm to 400 mm    - Length: 400 mm to 500 mm    - Height: 200 mm to 300 mm   3. **Large Foot Platforms:**    - Width: 400 mm to 600 mm    - Length: 500 mm to 800 mm    - Height: 300 mm to 500 mm   Keep in mind that these are general dimensions, and the actual sizes may vary. If you are looking for a specific product, it\\\'s advisable to check the product description or contact the manufacturer for precise measurements. Additionally, some PVC foot steps may have adjustable features, allowing users to modify the height or angle for increased comfort.   Always consider your specific requirements and the intended use of the PVC foot steps when selecting a product, and refer to the product documentation or the manufacturer\\\'s specifications for accurate dimensions.PVC foot steps, also known as PVC footrests or PVC footstools, are versatile and durable components used in various applications for providing support, stability, and convenience. Here are some common uses:   1. **Medical and Healthcare**: In medical and healthcare settings, PVC foot steps are used as footrests or footstools for patients during examinations, procedures, and treatments. They provide a stable platform for patients to rest their feet, enhancing comfort and reducing strain on the lower limbs.   2. **Home and Office**: PVC foot steps are used in homes and offices as footrests under desks or workstations to support proper ergonomic posture and reduce fatigue. They help elevate the feet to a comfortable height, promoting circulation and reducing pressure on the lower back and legs during long periods of sitting.   3. **Retail and Hospitality**: In retail stores, restaurants, and hospitality venues, PVC foot steps are used as footrests or footstools for customers to enhance their comfort while seated. They provide a convenient place for patrons to rest their feet, promoting relaxation and improving the overall customer experience.   4. **Manufacturing and Industrial**: In manufacturing and industrial facilities, PVC foot steps are used as footrests or platforms for workers standing at workstations or operating machinery. They help reduce fatigue and strain on the legs and feet by providing a stable surface to support the weight of the body.   5. **Laboratory and Cleanroom**: In laboratory and cleanroom environments, PVC foot steps are used as footrests or step stools for researchers, technicians, and personnel working at elevated heights or accessing high shelves. They provide a stable and non-contaminating surface for workers to step on while maintaining a sterile or controlled environment.   6. **Outdoor and Recreational**: PVC foot steps are used in outdoor and recreational settings such as camping, hiking, and fishing as portable footrests or seating platforms. They provide a lightweight and durable solution for resting tired feet or sitting comfortably in outdoor environments.   7. **Childcare and Education**: In childcare centers, schools, and daycare facilities, PVC foot steps are used as step stools for children to reach sinks, toilets, and other elevated surfaces safely. They help promote independence and encourage proper hygiene practices among young children.   8. **Transportation and Travel**: PVC foot steps are used in vehicles such as trucks, RVs, and boats as portable footrests or step stools for passengers. They provide a convenient and stable surface for passengers to rest their feet or

PVC Braided Pipe, also known as PVC Braided Hose, is a type of flexible tubing made from polyvinyl chloride (PVC) material. It is reinforced with a braided layer, typically made of synthetic fibers like polyester or nylon. PVC braided pipes are commonly used in various applications due to their flexibility, durability, and resistance to a wide range of chemicals. Here are some key features and common uses of PVC braided pipes:

**Features:**

1. **Flexibility**: PVC braided pipes are highly flexible, making them easy to handle and install in various applications.

2. **Strength**: The braided reinforcement adds strength and stability to the pipe, preventing kinking or collapsing under pressure.

3. **Durability**: They are known for their durability and resistance to abrasion, impact, and weather conditions.

4. **Chemical Resistance**: PVC is inherently resistant to many chemicals, and this property is retained in PVC braided pipes, making them suitable for transporting a variety of fluids.

5. **Temperature Range**: PVC braided pipes can handle a broad temperature range, which makes them suitable for both hot and cold water applications.

6. **Corrosion Resistance**: PVC is non-corrosive, making it an excellent choice for water and fluid transport where corrosion is a concern.

**Common Uses:**

1. **Water Supply**: PVC braided pipes are often used for domestic and commercial water supply lines, including connecting faucets, showers, and washing machines.

2. **Irrigation**: They are suitable for agricultural irrigation systems due to their durability and resistance to chemicals.

3. **Air Compressors**: PVC braided hoses are used to connect air compressors and tools, providing a flexible and durable air supply.

4. **Chemical Transport**: They are used in chemical industries for transporting various chemicals, acids, and bases.

5. **Pneumatic Systems**: PVC braided pipes are employed in pneumatic systems for the transfer of compressed air.

6. **Car Wash Systems**: Car wash facilities often use PVC braided hoses for water and detergent supply.

7. **Hydraulic Systems**: In some low-pressure hydraulic systems, PVC braided hoses can be used.

8. **Vacuum Systems**: They can be used in vacuum systems for suction and discharge purposes.

9. **Food and Beverage Industry**: Food-grade PVC braided hoses are used for conveying food and beverages.

It's important to note that PVC braided pipes come in various sizes and specifications to suit different applications, so selecting the right type of PVC braided hose for a specific purpose is crucial to ensure safety and efficiency. Additionally, local regulations and standards should be followed when installing PVC braided pipes for potable water or other critical applications.

\\\"PVC foot rest\\\" generally refers to a footrest or footstool made from polyvinyl chloride (PVC) material. These foot rests can be used in various settings, providing comfort and support for the feet. Here are some features commonly associated with PVC foot rests:   1. **Durability:**    - PVC is known for its durability and resistance to wear and tear. PVC foot rests are designed to withstand regular use and maintain their structural integrity over time.   2. **Lightweight:**    - PVC is a lightweight material, making foot rests easy to move and reposition as needed. This feature is especially convenient in environments where flexibility and mobility are essential.   3. **Easy to Clean:**    - PVC foot rests are often easy to clean with just a damp cloth. This makes them suitable for use in various environments, including homes, offices, or medical settings where cleanliness is important.   4. **Non-Slip Surface:**    - Many PVC foot rests are designed with a non-slip surface to provide stability and prevent slipping when used on various floor types. This feature enhances safety, especially in workplaces or homes with smooth flooring.   5. **Comfortable Design:**    - PVC foot rests are often designed with user comfort in mind. They may have a contoured or textured surface to provide a comfortable and supportive platform for the feet.   6. **Versatility:**    - PVC foot rests come in various shapes and sizes to accommodate different preferences and needs. Some may have adjustable heights or angles to allow users to find the most comfortable position for their feet.   7. **Multipurpose Use:**    - These foot rests can be used in a variety of settings, including offices, living rooms, bedrooms, and workstations. They are versatile accessories that can complement different types of furniture.   8. **Affordability:**    - PVC foot rests are often more affordable compared to foot rests made from other materials, making them a cost-effective solution for those seeking a simple and functional footrest.   9. **Environmentally Friendly Options:**    - Some manufacturers offer PVC foot rests with eco-friendly considerations, such as using recycled PVC or employing sustainable manufacturing practices.   10. **Color and Design Options:**     - PVC foot rests come in a range of colors and designs, allowing users to choose options that match their aesthetic preferences or complement the decor of a particular space.   When selecting a PVC foot rest, it\\\'s important to consider factors such as the intended use, the level of comfort required, and any specific features that would enhance its functionality in your particular setting. Always follow the manufacturer\\\'s recommendations for proper use and maintenance. Export Packing                                                    Dimension in CBM PVC Water Stopper with Center Bulb Each Roll 25Mtr SR No Dimension Length Width Height CBM Weight kg/Roll 1 150x5mm 0.625 0.625 0.150 0.059 40  2 150x6mm 0.625 0.625 0.150 0.059 45 3 150x8mm 0.625 0.625 0.150 0.059 55 4 200x8mm 0.625 0.625 0.200 0.059 70 5 200x10mm 0.65 0.65 0.200 0.078 80 6 225x5mm 0.625 0.625 0.23 0.090 65 7 225x6mm 0.625 0.625 0.230 0.090 70 8 225x8mm 0.65 0.65 0.230 0.097 90 9 225x10mm 0.65 0.65 0.230 0.097 100 10 240x8mm 0.65 0.650 0.240 0.104 110 11 240x10mm 0.650 0.650 0.240 0.104 125 12 250x8mm 0.675 0.675 0.250 0.114 95 s13 250x10mm 0.675 0.675 0.250 0.114 115 14 300x6mm 0.700 0.700 0.300 0.147 95 15 300x8mm 0.725 0..725 0.300 0.158 115 16 300x10mm 0.750 0.750 0.300 0.169 145 17 300x12mm 0.775 0.775 0.300 0.18 140 18 300x15mm 0.800 0.800 0.300 0.192 160 Kiker Type 19 230x4mm 0.625 0.625 0.230 0.090 67 Dumbbell

Sandhyaflex PVC Water Stopper

Sandhyaflex PVC Water Stopper is a flexible waterproof sealing product used in concrete construction joints to prevent water leakage in structures such as basements, water tanks, tunnels, dams, swimming pools, reservoirs, retaining walls, and bridges. (

Ribbed Type

Provides strong grip with concrete and better sealing.

Installation Method

1. Fix the water stopper at the center of the concrete joint.

2. Tie it properly with reinforcement steel using wires/clamps.

3. Pour concrete carefully to avoid displacement.

4. Join water stopper ends using a heated blade welding method.

Sandhyaflex PVC Water Stopper


## Main Features

* High flexibility and durability
* Chemical and corrosion resistance
* Excellent waterproof sealing
* Handles expansion and contraction of concrete joints
* Suitable for high hydrostatic pressure areas
* Available in Center Bulb, Ribbed, Dumbbell, and Kicker types ([][1])

## Available Sizes

Common Sandhyaflex PVC Water Stopper sizes include:

* 150 × 5 mm
* 150 × 8 mm
* 200 × 8 mm
* 200 × 10 mm
* 230 × 10 mm
* 240 × 10 mm
* 300 × 12 mm
* 300 × 15 mm ([][2])

## Applications

Used in:

* Water tanks
* Sewage treatment plants
* Dams and canals
* Foundations and basements
* Bridges and retaining walls
* Tunnels and underground structures ([][1])

## Technical Specifications

| Property | Specification |
| ---------------------- | ------------------------ |
| Material | PVC (Polyvinyl Chloride) |
| Hardness | 60–75 Shore A |
| Tensile Strength | Above 12 MPa |
| Elongation | 250%–300% |
| Temperature Resistance | -10°C to +70°C |
| Standard | IS 15058 / ASTM D412 |

([][1])

## Types of PVC Water Stopper

### Center Bulb Type

Used where expansion and contraction movement is expected.

![Image]( Ribbed Type

Provides strong grip with concrete and better sealing.

![Image]( Dumbbell Type

Suitable for large expansion and contraction joints.

![Image]( Installation Method

1. Fix the water stopper at the center of the concrete joint.
2. Tie it properly with reinforcement steel using wires/clamps.
3. Pour concrete carefully to avoid displacement.
4. Join water stopper ends using a heated blade welding method. ([Sandhya Enterprises][3])

### Product Video

[Sandhyaflex PVC Water Stopper Demo]( more details, specifications, and product range:

* [Sandhyaflex PVC Water Stopper Products]( [Sandhyaflex Official Product Catalog]( "PVC Water Stopper at Attractive Price - Durable and Compliant"
[2]: "PVC Water Stopper 240x10mm - Durable and Affordable Price"
[3]: "PVC Water Stopper Manufacturer, Exporter & Supplier from Hyderabad India"

Sandhyaflex Water Suction and Discharge Rubber Hoses are versatile and durable hoses designed for transferring water and non-corrosive liquids in industrial, agricultural, and construction applications. These hoses are known for their strength, flexibility, and resistance to wear and tear, making them ideal for both suction and discharge operations.

Features of Sandhyaflex Water Suction and Discharge Rubber Hoses

1. 
   

   Material Construction:

   
   
   
   
   • Inner Tube: Smooth, high-grade synthetic rubber that resists water absorption and mild chemicals.
   
   
   • Reinforcement: High-tensile synthetic textile cords or fabric with a steel wire helix embedded for added strength and flexibility.
   
   
   • Outer Cover: Durable, weather-resistant synthetic rubber that offers excellent resistance to abrasion, ozone, and external elements.
   
   
   
   


2. 
   

   Key Characteristics:

   
   
   
   
   • Designed for both suction and discharge applications.
   
   
   • Flexible construction allows easy handling and maneuverability.
   
   
   • Resistant to kinking and collapsing under vacuum or pressure.
   
   
   • Lightweight yet durable for long-lasting performance.
   
   
   • Excellent weather and abrasion resistance.
   
   
   
   


3. 
   

   Applications:

   
   
   
   
   • Industrial: Pumping and transferring water in factories, refineries, and other facilities.
   
   
   • Agricultural: Irrigation, water supply, and drainage applications.
   
   
   • Construction: De-watering operations, site cleanup, and water supply for construction activities.
   
   
   • General Purpose: Municipal and commercial water suction and discharge.
   
   
   
   


4. 
   

   Sizes and Variants:

   
   
   
   
   • Available in a wide range of inner diameters (typically from 25 mm to 300 mm) to suit various flow requirements.
   
   
   • Custom lengths can be provided based on project needs.
   
   
   • Fitted with various end couplings like flanges, male/female threads, or quick-release connectors for compatibility.
   
   
   
   


5. 
   

   Technical Specifications:

   
   
   
   
   • Working Pressure: Typically 10-20 bar (varies based on model and size).
   
   
   • Temperature Range: -30°C to +80°C.
   
   
   • Vacuum Rating: Suitable for full vacuum conditions.
   
   
   
   


6. 
   

   Advantages:

   
   
   
   
   • Robust construction for heavy-duty applications.
   
   
   • Reliable performance in both suction and discharge operations.
   
   
   • Easy installation and maintenance.
   
   
   • Resistant to environmental factors, ensuring longer service life.
   
   
   
   

Why Choose Sandhyaflex Water Suction and Discharge Hoses?

• Durability: Manufactured using high-quality materials to withstand challenging working conditions.


• Versatility: Suitable for a wide range of industries and applications.


• Customization: Available in different sizes, lengths, and end fittings to match specific needs.


• Proven Quality: Sandhyaflex is a trusted name in industrial and agricultural hose manufacturing.

If you need specific dimensions, pressure ratings, or guidance on selecting the right hose for your application, feel free to ask!

A PVC water stopper, often referred to as a PVC water bar or PVC water stop, is a construction material used to prevent the passage of water through joints or expansion/contraction points in concrete structures. These water stoppers are typically made of polyvinyl chloride (PVC) or a similar plastic material, and they are designed to be embedded in concrete during construction to create a watertight seal. Here are some key points about PVC water stoppers:

1. **Purpose**: The primary purpose of a PVC water stopper is to prevent the ingress or egress of water through concrete joints, such as expansion joints, construction joints, and around penetrations like pipes and conduits. They help maintain the structural integrity of the concrete and prevent water leakage, which can cause damage and corrosion.

2. **Types**: There are different types of PVC water stoppers designed to suit specific applications and conditions. Common types include:

   - **Bulb Type**: These have a bulbous shape and are used in expansion joints or where high movement is expected.

   - **Ribbed Type**: Ribbed water stoppers have a ribbed surface to improve bonding with concrete.

   - **Dumbbell Type**: Dumbbell-shaped water stoppers are often used in construction joints.

   - **Center Bulb Type**: These have a central bulb and are used in areas with limited movement.

3. **Installation**: PVC water stoppers are typically installed by embedding them into the fresh concrete at the desired location. They are placed so that they create a continuous barrier against water penetration when the concrete cures and hardens. Proper installation is essential to ensure an effective water seal.

4. **Advantages**:

   - PVC water stoppers are resistant to water and chemicals, making them suitable for a wide range of applications, including in sewage treatment plants, dams, reservoirs, and basements.

   - They are flexible, allowing them to accommodate movement and settlement in the concrete without losing their sealing properties.

   - PVC water stoppers are durable and have a long service life.

5. **Maintenance**: Once installed correctly, PVC water stoppers require minimal maintenance. Regular inspections may be necessary to ensure that they remain in good condition and are effectively sealing the joints.

6. **Compatibility**: PVC water stoppers are compatible with concrete and do not corrode or react with it. They are also compatible with a variety of construction materials, making them versatile for use in different projects.

7. **Environmental Considerations**: PVC is a plastic material, and its use has raised environmental concerns due to issues associated with its production and disposal. Efforts have been made to develop more environmentally friendly alternatives in some cases.

PVC water stoppers are crucial components in many construction projects, especially in situations where waterproofing is essential. Proper selection and installation of the appropriate type of PVC water stopper can help ensure the integrity and longevity of concrete structures while preventing water infiltration.

Sandhya Enterprises are one of the top manufacturers in India. Water Stoppers are the flexible plastic strips that are used to provide a physical barrier to water. The barriers can be at concrete joints in basements, water-retaining structures like water tanks, swimming pools, structural foundations and other constructions of below ground level. Water stoppers are also known as water bars and seal construction joints. In a typical water stopper, there are two identical halves on both sides of the central bulb. They serve as an additional extension aiming to increase the path length for water entering behind the edge of water stopper. Compounding of PVC Water Stopper A PVC water stopper, also known as a PVC waterstop, is a type of construction material used to prevent water penetration in concrete structures, such as basements, swimming pools, water tanks, tunnels, and other areas where water containment is essential. It is designed to create a watertight seal and protect the integrity of the structure.   Here are some key details and features related to PVC water stoppers:   1. Material: PVC water stoppers are made from high-quality polyvinyl chloride (PVC) material, which is known for its excellent durability, flexibility, and chemical resistance. PVC is resistant to water, chemicals, and environmental factors, making it suitable for use in various water containment applications.   2. Types: PVC water stoppers come in different types and profiles, depending on the specific application and requirements. Common types include straight PVC water stoppers, bulb-shaped water stoppers, ribbed water stoppers, and external water stoppers, among others. Each type has its unique design and features to cater to different sealing needs.   3. Design and Structure: PVC water stoppers are typically designed with a combination of rigid and flexible sections. The rigid sections provide stability and anchoring within the concrete structure, while the flexible sections allow for movement and accommodate joint expansion and contraction.   4. Installation: PVC water stoppers are usually installed during the concrete pouring process. They are placed within the construction joints or between the concrete sections to create a continuous barrier against water infiltration. The water stoppers are embedded into the concrete, forming a mechanical bond and ensuring a secure seal.   5. Sizes: PVC water stoppers are available in various sizes and dimensions to suit different joint widths and concrete thicknesses. The sizes can range from narrow profiles for smaller joints to wider profiles for larger joints.   6. Applications: PVC water stoppers are widely used in construction projects involving water containment. They are commonly utilized in structures such as basements, swimming pools, water treatment plants, dams, reservoirs, tunnels, and underground structures to prevent water leakage and maintain structural integrity.   7. Standards and Certifications: PVC water stoppers may adhere to industry standards and certifications, ensuring their quality and performance. Standards such as ASTM (American Society for Testing and Materials) and ISO (International Organization for Standardization) may be applicable depending on the region and specific project requirements.     When purchasing PVC water stoppers, it's important to consider factors such as the joint width, project specifications, and the specific application requirements. Consulting with a trusted supplier or manufacturer specialized in construction materials can help ensure you select the appropriate PVC water stopper for your specific project.   Anti-ageing customized plastic compound is used for manufacturing the water stoppers. Alongside, it has PVC as a base polymer. Moreover, the properties it exhibit are high elasticity and tensile strength, immunity to corrosion, excellent weather resistance, unaffected by acids, alkalis, metals, salts and other chemicals. Other properties include lower wat

A water swellable bar, also known as a waterstop bar or swellable waterstop, is a specialized construction material used in civil engineering and building construction to create watertight seals in concrete structures. Water swellable bars are designed to prevent the passage of water through joints, cracks, or construction gaps in concrete and to provide a reliable and durable waterproofing solution. These bars are particularly effective in situations where a continuous, flexible, and self-healing seal is required. Here are some key features and uses of water swellable bars:

**Key Features:**

1. **Composition:** Water swellable bars are typically made from a combination of natural or synthetic rubber compounds and polymer materials that have the ability to absorb and swell upon contact with water.

2. **Profile:** They are often manufactured in the form of cylindrical bars or strips, which can be installed within construction joints, expansion joints, or around penetrations to create a watertight barrier.

3. **Swelling Properties:** The key feature of water swellable bars is their ability to absorb and swell when exposed to water. This swelling action helps to block water penetration and seal the joint or gap effectively.

4. **Self-Healing:** Water swellable bars have the ability to self-heal minor cracks or imperfections in the concrete over time. As they swell in the presence of water, they can close small openings and maintain the seal's integrity.

5. **Chemical Resistance:** They are often resistant to a range of chemicals, ensuring long-term performance and durability in various environments.

**Uses:**

Water swellable bars are used in a variety of construction applications to prevent water infiltration and create waterproof seals. Some common applications include:

1. **Construction Joints:** They are used to seal construction joints in concrete structures, such as foundation walls, basements, tunnels, and reservoirs, to prevent water from seeping through the joints.

2. **Expansion Joints:** Water swellable bars can be installed in expansion joints of bridges, buildings, and other structures to accommodate movement while maintaining a watertight seal.

3. **Pipe Penetrations:** They are used around pipe penetrations, such as water and sewer pipes, to create a waterproof seal where pipes pass through concrete walls or floors.

4. **Manholes and Sewers:** Water swellable bars can be used in manholes and sewer systems to prevent groundwater infiltration.

5. **Retaining Walls:** They are employed in retaining walls and dams to prevent water seepage through concrete joints and cracks.

6. **Tunnels and Underground Structures:** Water swellable bars are used to seal joints and connections in underground tunnels, subways, and other underground structures.

7. **Swimming Pools:** They are used to create watertight seals around joints and penetrations in swimming pool construction.

Proper installation of water swellable bars is critical to their effectiveness. The bars should be installed according to manufacturer recommendations, ensuring that they are securely positioned within the joint or gap. Additionally, they should be protected from exposure to moisture during storage and handling to prevent premature swelling before installation. Regular inspections and maintenance may also be required to ensure the ongoing performance of the water swellable bars.

White color PVC granules are commonly used in the production of gumboot shoes (also known as Wellington boots or rubber boots). PVC (polyvinyl chloride) is a versatile and durable material that is widely used in the footwear industry for its water-resistant properties and ability to withstand various environmental conditions.   Here are some key points regarding white color PVC granules for gumboot shoes:   1. **Material Composition:** PVC granules are typically composed of polyvinyl chloride resin, plasticizers, stabilizers, and colorants. The white color is achieved by adding a specific type and amount of pigment or dye to the PVC mixture.  White PVC (Polyvinyl Chloride) granules refer to small particles or pellets of PVC material that are typically white in color. These granules are produced through a process called polymerization, where vinyl chloride monomers are polymerized to form PVC resin, which is then processed into granules.   Here's a brief overview of the uses and applications of white PVC granules:   1. **Pipe and Fittings**: White PVC granules are commonly used in the production of PVC pipes and fittings for various applications, including plumbing, irrigation, drainage, and wastewater systems. PVC pipes are preferred for their durability, corrosion resistance, and smooth inner surface.   2. **Profiles and Extrusions**: These granules are used in the manufacturing of PVC profiles and extrusions, such as window frames, door frames, trims, moldings, and siding. White PVC profiles are favored for their aesthetic appeal, low maintenance requirements, and resistance to weathering.   3. **Wire and Cable Insulation**: PVC granules are utilized in the production of insulation and sheathing for electrical wires and cables. White PVC compounds are preferred for their electrical insulation properties, flame retardancy, and mechanical strength.   4. **Medical Devices**: In the medical industry, white PVC granules are used to manufacture medical-grade tubing, hoses, and containers for applications such as IV sets, blood bags, catheters, and medical equipment housings. PVC is chosen for its biocompatibility, sterilizability, and chemical resistance.   5. **Consumer Products**: White PVC granules are found in various consumer products, including toys, footwear, inflatable products, shower curtains, and stationery items. PVC's versatility, ease of processing, and cost-effectiveness make it a popular choice for consumer goods manufacturing.   6. **Packaging**: PVC granules are sometimes used in the production of rigid packaging containers and blister packs for pharmaceuticals, cosmetics, and consumer products. White PVC packaging provides product visibility and protection against moisture, light, and contamination.   7. **Automotive Components**: In the automotive industry, white PVC granules are used to produce interior and exterior components such as dashboards, door panels, trim elements, and weather seals. PVC offers good impact resistance, weatherability, and ease of fabrication.   8. **Flooring**: PVC granules are employed in the manufacturing of resilient flooring products such as vinyl tiles, vinyl plank flooring, and vinyl sheet flooring. White PVC flooring is popular for its durability, easy maintenance, and wide range of design options.   In summary, white PVC granules find extensive use across various industries for producing a wide range of products, including pipes, profiles, wires, medical devices, consumer goods, packaging, automotive components, and flooring, among others. 2. **Properties:** PVC has excellent chemical resistance, durability, and water resistance, making it suitable for gumboot shoes that are often used in wet or muddy conditions. It is also known for its flexibility, which contributes to the comfort and functionality of the footwear.   3. **Manufacturing Process:** The production of gumboot shoes involves a process called injection molding. The PVC granules are heated and melted before being in